![]() ![]() Go to the MySensors platform pages under "related components" to see what message types are currently supported. As more features are added, they will be described here in the documentation. Not all features of MySensors 2.x are supported by Home Assistant yet. the input topic for Home Assistant needs to be the output (publish) topic of the gateway. You will also need to enter topic prefixes for input and output. If you are using the MQTT gateway, enter mqtt instead of an IP address or serial device. In addition to the serial device you also need to enter the baud rate. The exact number can be determined with the command shown below. If you are using an original Arduino as a serial gateway, the port will be named ttyACM*. To integrate your Serial, Ethernet (LAN) or MQTT MySensors Gateway, go to Configuration > Devices & Services in the UI, click the button with + sign and from the list of integration select MySensors.Ĭonfiguration depends on the type of Gateway you use: Serial gateway Go to the states section of the developer tools to find the devices that have been identified. That is, you do not need to add anything to your configuration for the devices for them to be added. This integration will automatically add all available devices to Home Assistant, after presentation is done. The MySensors project combines devices like Arduino, ESP8266, Raspberry Pi, NRF24L01+ and RFM69 to build affordable sensor networks. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |